This is a brand new driver, written from scratch for WINXP. The same driver works ok under Vista to.
1.Unzip the file tcpipxp.zip in a clean directory.
2.Open Control Panel and select "Add Hardware".
3.Wait while windows searching........
4.Press [NEXT] and select "Yes, I have already Connected the hardware". Press [Next].
5.Wait while windows searching........
6.Select from the list the last item "Add a new hardware device" and press [NEXT].
7.Select "Install the hardware that i manually select from a list (Advanced)". Press [NEXT].
8.Select from the list "Network Adapters", press [NEXT].
9.Press the [Have disk..] button, and browse to the directory where you have unzipped the drivers.
10.Select the "AGWTCPxp.inf" file. Press [OK] to return to the Add hardware Wizard. Select the "SV2AGW TCPIP Over Radio NDIS Driver" and press [Next].
11.It will ask you for Digital signature ignore it and press [Yes].
13.Now from control panel select "Network and dial-up Connections. You should have this new entry. Double click it and press [Properties]. Select the "TCP/IP" protocol and fill your ip , gateway and dns addresses.
14.You have finished with the installation of the Virtual Ethernet Card.
You are ready now to configure AGW Packet Engine. Do it from the "TCPIP Over Radio Setup" dialog.
The drivers are not free and you need to register. The registration fee is 28 $USA. Please be careful you need to register only the TCPIP drivers. All other packet operations are free. You can register from BMP a company that handles my registrations. You can use any credit card, money order, checks etc. You can register from WEB secure, unsecured method etc, Fax, Toll free telephone etc. Please include the follow info.
1. You Name.
2. Your Callsign
3. The way you wish to receive your registration number (Email or Postal Address).
4. A phone number (in case of a problem)